Print Print
Alliance iS HPLC Systems User Guide
Contents Contents
Alliance iS HPLC Systems User Guide
Download PDF Download PDF
Operating the device

Intended use of the system

Intended use of the system
Topic LCI-USG-0022, Last Updated 11/08/2024

The Alliance iS HPLC systems perform liquid chromatography to separate, identify, and quantify components of a liquid mixture. It supports column particle sizes down to 2.7 µm and pressures up to 12,000 psi for routine laboratory analyses. The Alliance iS HPLC system comes standard with UV absorbance detection in the form of a TUV or a PDA detector.

Note: The Alliance iS Column Heater Cooler (CHC) is an AC-powered device that houses the fluidics column used to perform HPLC (High Pressure Liquid Chromatography) separations for the Alliance iS HPLC systems. The CHC assembly can provide temperature to the column from 4 °C to 90 °C. If the LC column is equipped with a passive NFC tag (13.56 MHz), it is read when the front door of the CHC is closed. The antenna circuitry is normally not active until the door closure service event. Data from the tag is stored in the system.

Need Help? Connect with a Waters expert. 

Create Support Request

To avoid risk of personal injury and to prevent damage to laboratory equipment, always operate your Waters products in accordance with the applicable operational and safety information, your organization’s standard operating procedures, and local regulations.

Refer to the English version of this page for the latest information.

Back To Top Back To Top