Print Print
Alliance iS HPLC Systems User Guide
Contents Contents
Alliance iS HPLC Systems User Guide
Download PDF Download PDF
System preparation

Powering-on the system

Powering-on the system
Topic LCI-USG-0042, Last Updated 11/08/2024

The power button is located on the front door of the sample manager.

After the system is plugged in, the power button LED blinks.

To power-on the system:

  1. Push the power button located on the front door of the sample manager.
    The power button LED will light up steadily and the system will power-on. When the power-on process completes, the Idle screen appears.
    Figure 1: Alliance iS power button
  2. Sign in to the Alliance iS HPLC System. See Signing in and out of the Alliance iS HPLC System.

Need Help? Connect with a Waters expert. 

Create Support Request

To avoid risk of personal injury and to prevent damage to laboratory equipment, always operate your Waters products in accordance with the applicable operational and safety information, your organization’s standard operating procedures, and local regulations.

Refer to the English version of this page for the latest information.

Back To Top Back To Top